Truck Actuated Dockleveler
This is a fully automatic loading ramp where there is no dock attendant needed. It consists of a lift by-pass for safety and toe guards on each side. As the truck backs against the twin actuating arms (bumpers) it pushes the carriage back. The dock and trailer must be raised for this process to work. As the carriage goes back the deck goes up. When the carriage bumpers contact the dock, the deck floats down to rest on the trailer. When the truck pulls out, the deck returns to level supported position automatically
-
55,000 psi high strength checker plate deck
-
12″ long lip (extends 6½” into truck)
-
Toeguards on each side
-
Service range of 12″ above through 8″ below dock
-
(2) Molded Bumpers; 5″W x 16″H x 6″D
-
Lift By-Pass for Safety
Truck Actuated Dockleveler | |||
Model (V) | Description | Capacity (lbs) |
Wt. (lbs) |
RU-600-SCB | 6’Wx6’L recessed unit, Standard 28″ Deep Pit | 20,000 | 2036 |
RU-800-SCB | 6’Wx8’L recessed unit | 20,000 | 2399 |
RU-800-SCB-F | 6’Wx8’6″L recessed unit | 20,000 | 2475 |
RU-1000-SCB | 6’Wx10’L recessed unit | 20,000 | 2702 |
SU-600-SCB | 6’Wx6’L recessed unit w/ legs, Full 48″ Deep Pit | 20,000 | 2127 |
SU-800-SCB | 6’Wx8’L recessed unit w/ legs | 20,000 | 2490 |
SU-800-SCB-F | 6’Wx8’6″L recessed unit w/ legs | 20,000 | 2566 |
SU-1000-SCB | 6’Wx10’L recessed unit w/ legs | 20,000 | 2793 |
PU-600-SCB | 6’Wx6’L w/ legs for in front of dock placement | 20,000 | 2372 |
PU-800-SCB | 6’Wx8’L w/ legs for in front of dock placement | 20,000 | 2802 |
PU-1000-SCB | 6’Wx10’L w/ legs for in front of dock placement | 20,000 | 3172 |
(specify Dock Height when ordering) |
Truck Actuated Dockleveler Options | ||||
Model (V) | Description | Wt. (lbs.) |
||
WS-DV | Dual Vinyl weather-stripping factory installed | – | ||
CAS | Curb angle set (For any size Dockleveler) | 242 | ||
TA-30K/6 | 30,000 lb. capacity for 6′ length | – | ||
TA-30K/8 | 30,000 lb. capacity for 8′ length | – | ||
TA-30K/10 | 30,000 lb. capacity for 10′ length | – | ||
7W/6 | 7′ width for 6′ length | 230 | ||
7W/8 | 7′ width for 8′ length | 253 | ||
7W/10 | 7′ width for 10′ length | 299 | ||
FI | Foam Insulation | 6 | ||
TL | Notch for trailer lock | – | ||
SPO | Shallow Pit Option (24″ Minimum depth) | – | ||
BE | Bumper extensions for low docks | – |